REBEL Leisure SUP pump with its built in rechargeable lithium battery is unlike other electric pumps on the market because you can inflate your SUP board or inflatable boat anywhere making it fully portable. No need for the stress out of inflating your board either manually or beside your car in a car park. In addition, the car aux adaptor allows you to inflate your board like the conventional electric pumps if you run the battery down whilst out.  To charge the battery use the mains power 3 pin plug (takes 2-3 hrs). Pre sets of 12/16/20psi on the lcd display and you can also select any psi from 2-20psi to auto inflate your board. With auto shut off so no over inflation.  

On a full battery charge the pump can inflate a 10'8" board to 16psi. If you need more inflation capacity then we also sell a battery pack. Pump comes with mains charger and cigarette aux adaptor, 3 interchangeable washers and 2 nozzles for SUP boards and 3 more nozzles for other inflatables (kayaks, airbeds, tents, water toys etc). Comes in a neat carry bag with shoulder strap and weighs 1.5kg.  1 year's warranty.

£99 with free delivery to mainland UK. Email for delivery cost outside this area.

How to use your Rebel pump video

Power 110w Voltage 

12v Power Lithium Battery

Battery Capacity 2500 MAHx3


Max Pressure 20 psi

Air flow 70L/min

Weight 1.5 kg

Size 25x17.5x15.5cm


£39.00 with free delivery to UK mainland. Can also be bought as a package with the Rebel SUP pump for £129.

Our Rebel rechargeable lithium battery pack doubles the inflation capacity of your Rebel Leisure pump as it can be connected to your pump with the adapter cable provided.  Its battery power has the same capacity as the Rebel pump's built in battery so it doubles the amount of boards you can inflate. This is a great little product (90mm x 65mm x 35mm) which will easily fit into your SUP pump bag.  Comes with an adapter cable and 3 pin mains charger plug.  It will take approximately 2-3 hours to charge to full capacity like your pump. Note: The pump MUST be left to cool down between multiple board inflations so that it does not overheat.